Introduction

Norwich ev technology-

ev fly rods are built using only the finest carbon fibres. Aerospace grade Intermediate and high modulus fibres from 44 to 78 million P.S.I., with elongation figures as low as 1% in an amalgamation employing an exclusive high-impact epoxy resin system. which is then pultruded into 'pre-preg' carbon sheet.

This coupled with my unique multi-layer compound tapered pattern designs and exclusive compound mandrill tapers, results in fly rod shafts with low mass and fast efficient recovery rates.

Whichever ev series fly rod you choose, you will find that casting with a Norwich rod is -

a uniquely 'tactile' experience.

David Norwich working on designs of prototype carbon patterns for EV2 fly rod tip sections

TAX FREE

The most exclusive range of hand built Trout, Sea trout and Salmon fly rods.

Constantly evolving to improve performance - the ev Fly rod series will always remain

David Norwich ev fly rods are not mass produced.

From the blank patterns - hand cut from custom pre-preg carbon sheet through to the final ring wrap

and varnishing - they are individually built.

So, you may have to wait a bit longer for a Norwich rod, but your patience will be rewarded.

I want your pleasure in owning a Norwich rod to start from the moment you unwrap it and your

enjoyment in using it to increase with every fishing trip.
I now prefer to work one on one with my customer - building each rod to order.
For some a fly rod is just a tool, it is of no importance where it is made, or who made it, but I have

always believed that a fly rod is more than this - and that it is essentially a craftsman-made,

high precision item.

From the design concept of the blank taper - to the first trial cast with the completed rod, each one

deserves to be built and finished with such care and attention to detail that it will become

a treasured possession.

_________________________

With the setting up in late 1996 of my own carbon-fibre rolling facility south of Edinburgh in the

Scottish Borders, on the Gala water, a tributary of the famous River Tweed.

I realized a long-held ambition to no longer be just another carbon fly rod "assembler,"

but to design and manufacture graphite fly rods and blanks in house

from my own custom sourced carbon fibre pre-preg

_________________________.

I have had the great satisfaction of developing my fly rods

professionally for almost three decades now - from my original beginnings as a Bamboo Rod maker.

I still draw on these original skills and input these to the modern technology of carbon rod making.

I find it most gratifying when a happy customer returns after purchasing their

first Norwich rod to buy a second, or a third ...

______________________

I offer over Fifty Trout and Salmon models, and if you can't find what you are looking for in this selection,

I offer my Custom Build Service.

Complete rod or Blank only- Custom Built to your specification.

PART EXCHANGE WELCOME

SALE! ROD BLANKS, USED AND PART EXCHANGED AND EX DEMONSTRATOR RODS

ROD REPAIRS

I CAN SUPPLY REPLACEMENT SECTIONS FOR MOST CARBON FIBRE FLY AND SPIN RODS.

EITHER TO THE ORIGINAL SPECIFICATION OR SUPER-CHARGE YOUR ROD WITH A NORWICH HIGH PERFORMANCE UPGRADED TAPER AND THE LATEST AEROSPACE CARBON FIBRES.

PRICES FOR INDIVIDUAL CUSTOM BUILT CARBON SECTIONS FOR HOME FINISHING START AT £55.00 PLUS CARRIAGE.

CONTACT ME FOR AN EXACT QUOTATATION WITH DETAILS OF THE ROD YOU REQUIRE A SECTION FOR.

Email : davidnorwichrods@btinternet.com

TEL: 01578 760 310

Norwich Fly rod Performance Factor Information

eV2 - Two and Three section Fly rods eV2 Multi-section Fly Rods eV4 Salmon double hand Spey Rods

eV3 Saltwater Fly Rods Custom Built Spinning rods

Norwich HMG G-3 Fly Rod Blanks Rod Building Components

Customer comments Warranty Information

Rod Care Advice David Norwich Rodmaking History

THERE BE GIANTS.......(A Parable for Our Time )

Contact

LINKS

________________________________________________________

Home

WORLD CLASS BAHAMAS FLATS WADING FOR BIG BONEFISH